Beam Entry Alert, PhotoBeam Alarm Product Sales

Photo Beam Entrance Alert

Photo Beam Entrance Alert
Retro-reflective design.
Perfect for monitoring an entrance or use as an entrance indicator.
Will make “ding-dong" sound or siren sound when the beam is interrupted.
Speaker volume can be adjusted or turned off.
When in siren mode, sounding time is adjustable from 3 to 30 seconds.
9VDC adapter included.
All components plug into each other. No hard wiring required.
Includes the following:
NIR retro-reflective sensor.
Reflector.
Speaker.
9VDC 200mA output adapter.
Model Number E-931CS22RRC
Type NIR Retro-Reflective Entry Alert System
Sensing Range 22' (7 m)
Supply Voltage Sensor: 9-15 VDC, Chime: 12VDC
Total Current Drain 100mA Max.
Standby Current 25mA Max.
Light Source: IR LED
Control Output: Relay (AC 120V/DC 24V, 2A)
Ambient Temperature: -4ºF (-4º-20ºC) ~ 122ºF (50ºC)
Speaker Response Time: ~1 sec. for Chime, 30 sec. for Alarm
Speaker Volume Adjustable from 0 ~ max.
Alarm Time Range: Adjustable 3~30sec. for alarm
External Chime Output: Ground output (100mA)
Speaker Output: Chime / Off /Alarm (Select by switch)
Mounting Brackets: All Included

  Complete Hardwired System
* Uses Invisible Beam of Light
* Settings for Alarm or Chime
* Volume Control
* Power Supply included
* Plugs in to Standard AC Outlet
* Works with Door Open or Closed

  Complete Hardwired Photo Beam Entry Alert System

Add on Speaker unit for EA2 Photo Beam Alert System

Speaker:
Additional speaker / electronic chime.
Use any standard stereo cord with 1/8" stereo plug

  Features a 30 Foot Cable that plugs into The EA2 Photo Beam Entry Alert. Adds a second chime.

Add on Electronic Digital Counter for EA2 Photo Beam Alert System

Digital Counter:Automatically tracks how often the EA2 is triggered.
Push buttons to manually add to or subtract from counter, or to reset to zero.
Plugs into speaker - no wiring needed.
Other applications: offices, schools, warehouse, vehicle detection, etc.
Includes the following:
Digital Counter.
Mounting hardware.
Connection cord with plugs.

  Counts the number of Visitors, Electronically using the EA2 Photo Beam Entry Alert

  Plugs into the EA2 Photo Beam Entry Alert

Safety Beam Alert - Photo Beam System

You can know when someone " crosses the line". This high tech device creates an invisible infrared beam up to 60 ft. long. When the beam is crossed a loud alarm or a pleasant chime sound will be emitted. Can be used as an invisible playpen to alert you to your child or pet leaving a safe area. The alarm can also be used at night to scare off would-be intruders. In the chime mode, retail stores in businesses can use it to announce customers are alert them when someone enters an area that is "off limits". You can choose to have the chime sound only one time (when a customer enters a store for example) or the chime can sound continuously until you turn it off (when a customer enters an area that is "off limits" or at home when a child leaves a safe area for example). Distance can be sent to high or low- maximum distance 60 ft. In the chime mode, volume can be set to low, medium, or high. Two AC adapters are included. Three AA back up batteries are not included.