|
Photo Beam Entrance Alert
Photo Beam Entrance Alert
Retro-reflective design.
Perfect for monitoring an entrance or use as an entrance indicator.
Will make “ding-dong" sound or siren sound when the beam is interrupted.
Speaker volume can be adjusted or turned off.
When in siren mode, sounding time is adjustable from 3 to 30 seconds.
9VDC adapter included.
All components plug into each other. No hard wiring required.
Includes the following:
NIR retro-reflective sensor.
Reflector.
Speaker.
9VDC 200mA output adapter.
Model Number E-931CS22RRC
Type NIR Retro-Reflective Entry Alert System
Sensing Range 22' (7 m)
Supply Voltage Sensor: 9-15 VDC, Chime: 12VDC
Total Current Drain 100mA Max.
Standby Current 25mA Max.
Light Source: IR LED
Control Output: Relay (AC 120V/DC 24V, 2A)
Ambient Temperature: -4ºF (-4º-20ºC) ~ 122ºF (50ºC)
Speaker Response Time: ~1 sec. for Chime, 30 sec. for Alarm
Speaker Volume Adjustable from 0 ~ max.
Alarm Time Range: Adjustable 3~30sec. for alarm
External Chime Output: Ground output (100mA)
Speaker Output: Chime / Off /Alarm (Select by switch)
Mounting Brackets: All Included
Complete Hardwired System
* Uses Invisible Beam of Light
* Settings for Alarm or Chime
* Volume Control
* Power Supply included
* Plugs in to Standard AC Outlet
* Works with Door Open or Closed
Complete Hardwired Photo Beam Entry Alert System
|
